4
12.
Press and hold the ‘power’ button until you
hear a beep.
13.
The UPS will now come online, and you should
have both an input and output value. The
output value should be 230v.
Once the set-up is complete, the UPS and
battery box display should look like this.
14.
Plug your refrigerator into
one of the outlets on the
back of the UPS.
Your setup is now complete.
Please do not plug anything else into the back of the UPS, and do not plug more
than one refrigerator into each UPS and battery pack, as this will reduce the
protection time offered.
In the event of a power failure, the UPS will revert to battery back-up and there will
be a constant beeping which can only be silenced by pressing the ‘ESC’ button
once
.
Please contact us directly on
1 800 658 120
to schedule a Programmed
Maintenance and Calibration service.
Thank you for choosing Medisafe Plus.
