AVE Opto 232 Operation Manual Download Page 4

Page 4 

• 

DVR Connection 

 

Since the DVR ground is normally part of the CCTV ground it 
should be connected directly to the ground of the VSI-Pro. If 
you are using the TXD output of the VSI-Pro to the DVR, Reg-
com, Networker or Vnetworker then you should use an AVE 
“Multifunction Cable Adapter” directly on the rear of the VSI-
Pro and then use the Opto232 after that connection to the 
cash register. The Multifunction cable will wire the TXD signal 
with the VSI-Pro ground directly to the DVR before the Op-
to232 and isolate the ground from the DVR from the cash reg-
ister. If you wish to isolate the ground of the VSI-Pro from the 
DVR then you should use another Opto232 or that purpose. It 
is not recommended to connect the DVR ground to the cash 
register ground but in many cases for properly installed CCTV 
systems this will be okay. 
 

• 

Other Connections 

 

Jumpers are provided in the Opto232 to defeat standard RS-
232C Hardware handshaking functions without special cable 
wiring. It allows you to short RTS and CTS together and/or 
DTR and DSR together via convenient jumpers. 

Summary of Contents for Opto 232













Reviews: