21
4.9
Party / Eco Program
With the “Party / Eco” function, you can cancel the temperature
profile of the set program for the next few hours (up to 23 hours and
50 minutes).
4.9.1
Setting the Party / Eco Program
1. Press both buttons
+
and
-
at the same time for approx. 2
seconds.
2. The display changes and shows the text
PERIOD
and a flashing
clock. Within 3 seconds, press one of the buttons
+
or
-
, and
set the desired period in increments of 10 minutes.
3. After 3 seconds, the display changes and shows the text
COMFORT
or
LOWER
. Within 3 seconds, select the comfort or lower tempera-
ture with the buttons
+
or
-
.
4. The display changes automatically after 3 seconds. The display
shows the desired target temperature with the addition “PARTY”
(for comfort temperature) or “ECO” (for lower temperature). The
Party or Eco program is active for the set period.
4.9.2
Early Cancellation of the Party / Eco Program
In order to cancel the “Party / Eco” program, press both buttons
+
and
-
for approx. 2 seconds, until the display changes. Wait another
3 seconds until the display changes back again. The Party / Eco pro-
gram is cancelled, and the addition “PARTY” or “ECO” disappears
from the display.
5
Programming
Note:
The P1 and P2 programs are factory fixed programs, and can-
not be changed.
5.1
Setting the Holiday Program
By setting a holiday program, the temperature profile of the set auto-
matic program can be cancelled for any period of time.
Note:
With the
ESC
button, you can cancel the programming at
any time.
1. Push the slideswitch switch to the MENU setting.
2. With the buttons
+
or
-
, select the entry
HOLIDAY
.
Confirm with the
OK
button.
Note:
If a holiday program is already saved, you can choose if
you want to check or clear it. In order to save a new holiday pro-
gram, the already saved holiday program must be cleared. See
section 4.8 on page 20.
3. If no holiday program has been saved yet, set the start and end
date now with the buttons
+
and
-
.
Set the year, month, date and hour one after the other. Confirm
each setting with the
OK
button.
The display changes automatically.
Note:
The end time must not be the same as or earlier than the
start time. Otherwise an error message is displayed:
ERROR
. The
holiday program must then be programmed again.
4. Select whether you want the comfort, the lower or the antifreeze
temperature for the set period. Confirm with the
OK
button.
ENGLISH
