Compact Scaler Switcher (with PoH)
GeM
NeXT
www.GeMNext.com
4.2.4
CEC Function
PS-5IN-SCALER supports CEC, it can be turned on/ off by sending RS232 commands
or OSD menu operations. The default setting is ON.
Commands pertaining to CEC: “50686%” (enable CEC) and “50687%” (disable CEC)
HDMI INPUT ports 1~3 support CEC, if the connected source devices also support
CEC and their CEC are on, users can control the source device and display via the IR
remote of PS-5IN-SCALER.
The working status related to CEC and STANDBY is showed as below:
Situation
Working Status
CEC: on, Standby: on
Press STANDBY button on IR remote, PS-5IN-SCALER enters in
standby mode, so do all HDMI source devices and display. Press
STANDBY button again on IR remote, PS-5IN-SCALER exits
standby mode, the previous selected HDMI input source device
and display start working too.
CEC: on, Standby: off
Press STANDBY button on IR remote, PS-5IN-SCALER enters in
standby mode, HDMI 1~3 source devices and display keep on.
CEC: on
Use
,
,
,
and
buttons on IR remote to
control HDMI source device.
CEC: off
Unable to control HDMI source device and display through IR
remote
DVD
HDTV
48V
LINE
IR EYE
IR IN
IR OUT
MIC INPUT
MIC
FIRMWARE
AUDIO OUT
L
R
RES RESET
RS232
Tx
Rx
L
R
INPUTS
OUTPUTS
3-HDMI
2-HDMI
1-HDMI / MHL
4-DP
5-VGA
HDMI
HDBT
CONTROL
DC 24V
IR OUT
IR IN
HDMI OUT
HDBT IN
Tx
Rx
HDBaseT Receiver
HDTV
IR Remote