Compact Scaler Switcher (with PoH)
GeM
NeXT
www.GeMNext.com
4. System Operations
4.1
Front Panel Buttons
Front panel buttons can be used for switching operations and volume adjusting.
4.1.1
Manual-Switching
Press
1-HDMI/MHL, 2-HDMI, 3-HDMI, 4-DP, 5-VGA
on front panel to select the
corresponding input source.
4.1.2
Auto-Switching
Press
AUTO
to enter in auto-switching mode.
The auto-switching mode abides by the following principles:
➢
New input
Once detecting a new input signal, the switcher would switch to this new signal
automatically.
➢
Rebooting device
PS-5IN-SCALER have the ability to save the last configuration before losing power.
If the last switching mode is auto-switching, once rebooted, the switcher will
automatically enter auto-switching mode, then detect all inputs and memorize their
connection status for future rebooting using. If the last displayed signal is still
available, the unit will output the signal. If not, the unit will detect all the input signals
wit priority from 1-HDMI/MHL to 5-VGA. When detected the first signal, it will
transfer to output.
➢
Signal removing
Once removing the current display signal, PS-5IN-SCALER will detect all input
signals with priority from 1-HDMI/MHL to 5-VGA. It will transfer the signal firstly
detected to be available to output devices.
Note: When the DP signal is switched as input, the DP source device may not read
the EDID data from display device, at this point re-plug the DP source device to solve
this phenomenon.
Auto-switching function works only when inputting new signal, removing a signal or
power rebooting. With any VGA port set to C-video or YPbPr, the system will be not
able to enter in Auto-switching mode.
4.1.3
Volume Adjusting
Press Volume Knob to choose MIC/Source audio needed to be adjusted, the
corresponding LED will turn green and keep on.
Adjusting the Volume Knob in clockwise direction to increase sound volume.
Adjusting the Volume Knob in anti-clockwise direction to decrease sound volume.