Avaya XBU48, Installation And Operator'S Manual, Page: 9 / 20

INSTALLATION
Avaya
t
XBU48 Site Preparation, Installation and Operator’s Manual
S
700071244 Issue 3
5
Installing the XBU48
The following instructions assume you have already removed the
XBU48s from the pallets according to the unloading instructions on the
outside of the shipping box.
To install the XBU48:
1. Place the XBU48 near the operating site. The UPS should be well
ventilated and away from direct sunlight or other heat source.
NOTE It is recommended to allow a minimum of 4.5” of space from the rear of the cabinet
for proper ventilation.
2. If you are using only one XBU48 and want increased stability or a
seismic installation, remove the mounting plates from the pallet
(see Figure 1). Otherwise, skip to Step 6.
5/16” Bolts
Mounting Plates
Figure 1. Seismic Installation Mounting Plates