12 dBi Directional Wide Angle Antenna
Hardware Specifications
E-2
Avaya Outdoor Antenna Installation Guide
Figure E-1
Mounting the 12 dBi Wide Angle Antenna
2. Assemble the angle adjustment brackets to the upper mounting bracket with
1/2” bolts, lock washers, flat washers and nuts.
3. Next assemble the angle adjustment brackets and lower mounting brackets
to the antenna base plate with 1/2” bolts, lock washers, and nuts.
This adjustment is for 0 degree mounting.
To adjust from 0 to -20 degrees, loosen the hardware at both ends of the
angle adjustment bracket and slide it in the slot to the preferred angle.
4. Tighten hardware securely. The U-bolts should be tightened to 9 Nm (7 ft.-
lbs).
5. Proceed with “Connecting the Antenna Cable” on page 4-6 to connect the
antenna to the indoor equipment and seal the antenna connectors.