Avaya W310, Command Reference Manual

Page: 28 / 440

Chapter 2 AP Group Commands
12 Avaya W310 Command Reference Guide
show AP-Group
User level: privileged, supervisor.
Command Mode: Root, AP-Group Interface
Use the
show ap group
command to display the AP-Group interface parameters and port
members.
Syntax:
The syntax for this command is:
show AP-Group
Example:
Related Commands:
• Use the
add-ports
command to add a port or ports to an Access Point (AP) Group.
The ports cannot be associated with any other AP Group.
• Use
delete-ports
to delete ports that are attached to the AP group.
• Use
interface AP-Group
to create an AP group.
W310-1# show ap-group
num of entries 3
AP-Group Name AP-Group Id ports
--------------------- ----------- ------
floor2 1 1
floor1 2 4
floor3 3 8