Avaya W310, Command Reference Manual, Page: 27 / 440

Chapter 2
Avaya W310 Command Reference Guide 11
Related Commands:
• Use the
add-ports
command to add a port or ports to an Access Point (AP) Group.
The ports cannot be associated with any other AP Group.
• Use the show AP-Group command to display the AP-Group interface parameters and
port members.
interface AP-Group
User level: supervisor
Use the
interface AP-Group
command to create an Access Point (AP) group
interface. This name represents a Light Access Point’s (LAP) AP group name.
A default AP Group named Default exists on the W310. This AP Group will use the
following policy rules:
• Ingress and egress direction of the default AP group has an attached default ACL policy.
of allow all traffic.
Use the [no] form of this command to remove the name for the AP Group.
Syntax:
[no] interface AP-Group <group-name>
The syntax for this command is:
Example:
To create an AP group name:
Related Commands:
• Use the
add-ports
command to add a port or ports to an Access Point (AP) Group.
The ports cannot be associated with any other AP Group.
• Use
delete-ports
to delete ports that are attached to the AP group.
• Use the
show AP-Group
command to display the AP-Group interface parameters and
port members.
Syntax Description
<group-name> AP Group name that pertains to a Light Access Point. Use up to
20 characters.
W310-1(super)# interface AP-Group engineering
W310-1(super/AP-Group engineering)#