manualshive.com logo in svg

Avaya VSP 4850 GTS DC, Installing, Page: 37 / 45

Share
Download
Avaya VSP 4850 GTS DC Installing Download Page 37

Figure 7: VSP 4850GTS

1. VSP 4000 USB drive with USB cover
2. Switch LEDs
3. 10/100/1000 ports (LEDs above ports)
4. Combo port SFP slots. Supports Avaya 1G SFPs and 100Base low speed SFPs.
5. SFP+ slots. Supports Avaya’s 1G SFPs and 10G SFP+s.
6. Console port

Figure 8: VSP 4850GTS-PWR+

1. VSP 4000 USB drive with USB cover
2. Switch LEDs
3. 10/100/1000 PoE+ ports (LEDs above ports)
4. Combo port SFP slots. Supports Avaya 1G SFPs and 100Base low speed SFPs.
5. SFP+ slots. Supports Avaya’s 1G SFPs and 10G SFP+s.
6. Console port

Warning:

Fiber optic equipment can emit laser or infrared light that can injure your eyes. Never look into
an optical fiber or connector port. Always assume that fiber-optic cables are connected to a light
source. For a translation of this statement, see 

Translations of safety messages

 on page 41.

Check Light Emitting Diode (LED) on the Avaya Virtual Services Platform 4000

May 2016

Installing Avaya Virtual Services Platform 4850GTS Series

37

Comments on this document? [email protected]

Summary of Contents for VSP 4850 GTS DC














































Reviews:

No comments