manualshive.com logo in svg

Avaya Virtual Services Platform 7200 Series, Installing Manual

Share
Download
Avaya Virtual Services Platform 7200 Series Installing Manual Download Page 37

SFP and SFP+ port LED state indicators

This section describes the transceiver port LED state indicators by color and fluctuation cues. These
ports use the LED on the left side of the port (

Link/Act

) to indicate whether or not the link is

established and if a transceiver is present and active.

The LED on the right side of the port (

In Use

) indicates the operating speed of the transceiver.

Table 13: SFP/SFP+ port LED state indicators

Label

Color and Status

Description

Link/Act

Off

There is no transceiver present and the port is administratively
enabled.

Amber (steady)

The port is actively transmitting, but there is no link. This
indicates a local fault.

Amber (blinking)

The port received a remote fault indicator (RFI).

Green (steady)

The port has established a link.

Green (blinking)

The port has established a link and there is data activity.

Green (slow blinking)

The port is administratively disabled.

In Use

Off

Operating at low speed (10 Mbps if SFP, 100 Mbps if SFP+)

Green (steady)

Operating at mid speed (100 Mbps if SFP, 1 Gbps if SFP+)

Green (blinking)

Operating at high speed (1 Gbps if SFP, 10 Gbps if SFP+)

QSFP+ port LED state indicators

This section describes the transceiver port LED state indicators by color and fluctuation cues. The

Link/Act

) indicates whether or not the link is established and if a transceiver is present and active.

Each 40 Gb QSFP+ port can be channelized into 4 x 10 Gb ports. To support channelization, each
QSFP+ port has four status LEDs under the port. When the QSFP+ port is not channelized, only the
LED on the left side of the port is used.

Table 14: SFP/SFP+ port LED state indicators

Label

Color and Status

Description

Link/Act

Off

There is no transceiver present and the port is administratively
enabled.

Amber (steady)

The port is actively transmitting, but there is no link. This
indicates a local fault.

Amber (blinking)

The port received a remote fault indicator (RFI).

Green (steady)

The port has established a link.

Table continues…

LED state definitions

November 2016

Installing the Avaya VSP 7200 Series

37

Comments on this document? [email protected]

Summary of Contents for Virtual Services Platform 7200 Series




















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands