manualshive.com logo in svg

Avaya Tandberg 150 MXP, Installation Instructions Manual, Page: 5 / 13

Share
Download
Avaya Tandberg 150 MXP Installation Instructions Manual Download Page 5

 

Issue 1.0 
1/10/2008 

2008 Avaya Inc. All Rights Reserved. 

5 of 13 

 

 

 
                          IP Codec Set 
 
    Codec Set: 2 
 
    

Audio

        Silence      Frames   Packet 

    

Codec

        Suppression  Per Pkt  Size(ms) 

 1: 

G.722.1-32K

                 1        20 

 2: 

G.711MU

           n         2        20 

 3: 
 4: 
 5: 
 6: 
 7: 

 
 

2.2.2 

Proceed to Page 2, and enable direct IP multimedia as displayed. 
 

change ip-codec-set 2                                           Page   2 of   2 
 
                          IP Codec Set 
 
                              

Allow Direct-IP Multimedia? y 

              

Maximum Call Rate for Direct-IP Multimedia:  384:Kbits 

     Maximum Call Rate for Priority Direct-IP Multimedia:  384:Kbits 
 
                    Mode               Redundancy 
    FAX             relay               0 
    Modem           off                 0 
    TDD/TTY         US                  3 
    Clear-channel   n                   0 

 
 

 
Note: See Avaya Video telephony Solution R3 Networking Guide for recommendations on 
determining the LAN maximum call rate and for more details on priority video. [8] 

 

 

Step 

Description 

2.2.3 

Issue the command “

change ip-network-region <n>

”, where 

n

 is the number of an available 

IP network region, and administer settings as displayed. 

•

 

Enter the number of the IP codec set provisioned in 

Step 2.2.1

 in the 

Codec Set

 field. 

•

 

Use default settings for remaining fields. 

 

change ip-network-region 100                                    Page   1 of  19 
 
                               IP NETWORK REGION 
  Region: 100 
Location:         Authoritative Domain: avaya.com 
    Name: H.323 Video 
MEDIA PARAMETERS                Intra-region IP-IP Direct Audio: yes 
      

Codec Set: 2

              Inter-region IP-IP Direct Audio: yes 

   UDP Port Min: 2048                      IP Audio Hairpinning? n 
   UDP Port Max: 3329 
DIFFSERV/TOS PARAMETERS                  RTCP Reporting Enabled? y 
 Call Control PHB Value: 46      RTCP MONITOR SERVER PARAMETERS 

Summary of Contents for Tandberg 150 MXP














Reviews:

No comments