Issue 1.0
1/10/2008
2008 Avaya Inc. All Rights Reserved.
11 of 13
4.
Use the directional key to scroll to and highlight the
IP Address: Static
radio button and
press the
9
key to select it.
5.
Use the directional key to scroll to the
IP Address
,
IP Subnet Mask
, and
Gateway
parameters. Use the keypad to enter values for these parameters as appropriate.
6.
Use the directional key to scroll to and highlight the
Save and Restart
icon at the bottom
of the screen. Press the
9
key to select this choice then press the
9
key again when the
Restart
dialog prompts for confirmation of the restart.
4.2. Configure the Tandberg Centric 150 MXP
This section describes the steps for configuring Tandberg Centric 150 MXP. The provisioning
depicted in this section was administered via the CLI. This section assumes the Tandberg Centric
150 MXP is administered with IP network parameters, and has IP network connectivity with the
CLAN on Avaya Communication Manager. It should be noted that since the Tandberg Centric
150 MXP does not support the DHCP Option 242 message, the gatekeeper must be statically
configured on the Tandberg Centric 150 MXP.
Establish a telnet session using the MS DOS telnet client supplying the IP Access Password
when prompted.
Step
Description
4.2.1
Log in to the Tandberg Centric 150 MXP with the appropriate credentials, and enter the
following commands as displayed. The Tandberg Centric 150 MXP must be re-booted to
accept the administrative changes.
Note
: The commands of the type, “
xConfiguration H323Gatekeeper Avaya
” must be entered
via the CLI. The others may be entered via the keypad on the Tandberg Centric 150 MXP
.
xConfiguration H323CallSetup Mode: Gatekeeper
xConfiguration H323Gatekeeper Discovery: Manual
xConfiguration H323Gatekeeper Address: "192.168.11.10"
xConfiguration H323Gatekeeper Authentication Mode: Auto
xConfiguration H323Gatekeeper Authentication ID: "33611"
xConfiguration H323Gatekeeper MultipleAlias: Off
xConfiguration H323Gatekeeper Avaya Mode: On
xConfiguration H323Gatekeeper Avaya AnnexH: On
xConfiguration H323Gatekeeper Avaya MultipointCount: 0
xconfiguration H323Gatekeeper Avaya Password: 123456
xConfiguration Conference H323Alias E164: "33611"
xConfiguration Conference H323Alias ID: ""
boot
Note: Substitute your own IP address for the gatekeeper, and appropriate Authentication ID,
Avaya Password and H323Alias E164 values.
