Avaya Scopia Elite 5200 Series, Platform Manual, Page: 17 / 35

10 <Book title goes here>
How to Install the Brackets
Adjusting the Bracket Length on page 11
Installing the Brackets on page 12
R
ACK
A
TTACHMENT
L
OCATION
After you have decided where to mount the SCOPIA Elite MCU chassis on the
rack, you need to locate the corresponding holes in the mounting strips that are
connected to the rack posts, as shown in
Figure 2-2 . You secure the brackets
through these holes.
Figure 2-2 Mounting Strips on the Rack Posts
I
DENTIFYING
T
HE
B
RACKET
P
ARTS
The inner side of each bracket has a turned ledge at the bottom that forms a shelf
to support the chassis. You can tell the brackets apart as follows:
The bracket that goes on the rack’s left side is the one whose ledge faces
right.
The bracket that goes on the rack’s right side is the one whose ledge faces
left.
Figure 2-3 shows how to identify the left and right brackets and which side to
attach to the front and rear sides of the rack.