12
<Book title goes here>
How to Install the Brackets
Figure 2-4
Adjusting Bracket Length - Open View
To adjust the bracket length to correspond with the rack’s depth, from the
mounting kit, you need:
Both left and right brackets
The Allen wrench
Procedure
1
Use the provided Allen wrench to release the bracket’s Allen screw.
2
For each bracket, slide the two bracket parts until the round hole meets
the elliptic hole corresponding to the depth of the rack.
3
Insert the Allen screw where both holes meet.
I
NSTALLING
THE
B
RACKETS
Install the brackets after you have:
Identified the left and right brackets.
1
Bracket part that attaches to the rear post
2
Bracket part that attaches to the front post
3
Allen screw - threee elliptic hole options
for adjusting the length