BS; Reviewed:
SPOC 2/14/2005
Solution & Interoperability Test Lab Application Notes
©2005 Avaya Inc. All Rights Reserved.
13 of 22
RAD-IP-Mux.doc
Step
Description
2. Connect the bundles
Display the Bundle connection configuration menu (
Configuration > Connection > Bundle
connection configuration
). Configure the following parameters:
a.
Destination IP address
– IP address of IPmux-14 at remote site. For example,
192.168.60.200
b.
Next Hop
– For example, 192.168.50.1.
c.
Connection Status
–
Enable
.
d.
Destination bundle
– For example
1
.
e.
OAM Connectivity – Enable.
The device starts transmitting at full rate after it detects an
active unit on the other side of the line.
f.
Jitter Buffer – 5
msec. This sets the desired depth of the jitter buffer.
3.
Repeat steps 1 and 2 for other TDM links.