Chapter 3
Configuration
7— Module Advanced Configuration
This option is not currently operational.
8 – Set Ethernet Ports’ parameters to their default values
or
5 – Set Fast Ethernet Ports’ parameters to their default values
If the P113F is operating Standalone (that is, without a P110 NMA), the displayed
option is
Set Ethernet Ports’ parameters to their default values.
If the P113F is operating with a P110 NMA, or as part of a stack, the option affects
only the two Fast Ethernet ports.
Set Fast Ethernet Port parameters to their
default values
is displayed
.
Other Ports in the stack can be changed to their
default values via the equivalent option in the P110 NMA setup menu
Set Ethernet Ports’ Parameters to their Default Values
This option appears when the P113F is operating standalone. It returns all Ethernet
port parameters such as VLAN number, port mode and administration status to
their default values. It does not affect agent access parameters such as IP
addresses, IP Routes, and Permanent Managers.
This option also sets 100 Mbps ports on the P113F to their default values.
You may wish to reset all ports, for example, to move the product from a testing to
real environment or the changed ports are not operating as expected.
If you reset all the ports in a working system, you will lose all the environment
settings configured to each P110 stack port. The ports will then not operate
properly in your environment.
Perform the resetting of a port’s parameters 90 seconds after power-up or a reset of
the stack.
*** Set default values ***, Confirm [y/n]?
After confirming the resetting of a port’s parameters, an automatic reset will be
performed.
Set Fast Ethernet Port Parameters to their Default Values
This option returns the Fast Ethernet port parameters such as VLAN number, port
mode and administration status to the ports’ default values. It does not affect agent
access parameters such as IP addresses, IP Routes, and Permanent Managers.
Use this option if, for example in using CajunView, you accidentally disabled the
port to which the management station is connected. If you disable the port to
34
P113F Stackable Switch Installation Guide
