Chapter 3 Configuration
2. Select the type of community you want to change. This opens a Community
specific menu like the Read-Only menu shown below:
Read-Only Community Menu
S/W Version: ____ Slot #: ____
<CR>
Refresh the screen
0
return to the previous menu
1
Save the Session
2 List
-----------------------------
3 Add[]
4 Delete[]
5 Update[]
>>>Enter your choice:
3. Select
Add
to define a new Community name
Select
Delete
to remove an existing Community name
Select
Update
to change an existing Community name
4. Type the appropriate SNMP Community name as shown in the example
below:
Read-Only Community Names are:
1 –
public
2 -
3 -
4 -
5 -
>>>Enter Read-Only community name [24 char]:
newname
5. To review your changes, select the
List
command.
6. To save your changes select
Save the Session
.
7. Repeat Steps 2-6 for any additional Community types.
8. Type
0
to return to the Communities main menu.
You must reset the agent after changing one or more Community names.
P113F Stackable Switch Installation Guide
31
