DHCP Installation
Page 7
User PC Connection
To simplify the number of LAN connections from the user's location, it is
possible to route their PC LAN cable via the 4600 Series IP Telephone.
The LAN cable should be connected from the PC to the socket with a PC
symbol ( ) at the back of the IP Phone.
The PC's network configuration does not need to be altered from that which
it previously used for direct connection to the LAN.
Additional Notes
Whilst having
Gatekeeper Enable
and
Auto-create Extn Enable
selected
simplifies installation of 4600 Series telephones, in some situations
additional extension security may be required. This can be achieved in a
number of ways:
•
Password Protection
During phone registration a password is requested. This password is
set in Manager as the User's Telephony
Login Code
.
•
When auto-create is being used, during initial registration of the
phone, digits entered at the password request are not validated or
stored.
•
Following a system or phone reboot, if the previously assigned
extension number is accepted (by pressing
#
), though a password
request is then shown no password validate is done.
•
Manually Creating Extensions
Deselecting
Auto-create Extn Enable
in Manager will mean that IP
4600 Series phones can only be registered against VoIP Extensions
and Users that have been previously created within Manager.
•
Restricting the Extension to a Specific Physical Phone
Under the
Extension VoIP
tab in Manager, enter the MAC address of
the IP 4600 Series telephone. The phone's MAC address is printed on a
label under the phone.
4600 Series IP Telephone Installation
Page 7
IP Office
40DHB0002UKCJ - Issue 5 (08/03/2002)