Avaya IP Office 4600 Series Installation Instructions Manual Download Page 5

DHCP Installation 

Page 5 

DHCP Installation 

DHCP Installation Preparation 

This installation process uses the IP Office Control Unit as a DHCP Server 
and H323 Gatekeeper to assign IP and telephony settings to the 4600 
Series IP telephone. It also assumes that the Manager application is used 
as the TFTP server during installation. This is the simplest method of 
installation.  

1. 

Voice Compression Module

 

The IP Office Control Unit must be fitted with a Voice Compression 
Module (VCM).  
a.  Using an asynchronous terminal program such as HyperTerminal, 

connect to the DTE port of the Control Unit (refer to the Manager 
Application Manual for full details).  

b. Enter 

AT

, the response 

OK

 indicates correct connection.  

c.  Reboot the Control Unit. Within the terminal program you will see 

the progress of the reboot. The line "

Voice Compression PCB 

detected

" indicates the presence of a VCM. The next lines indicate 

whether it is a 5, 10, 15 or 20 port VCM. 

2. 

Control Unit Settings

 

Using the Manager Application, open the configuration and select the 
System form. Check the following: 
a. 

System Name:

  

In the System tab ensure that a 

Name

 for the Control Unit has been 

entered.  

b. 

TFTP Server IP Address:

  

In the LAN1 tab, enter the IP address of the Manager PC as the 

TFTP Server IP Address

.  

c. 

Gatekeeper Settings:

  

In the Gatekeeper tab, ensure that 

Gatekeeper Enabled

 and 

Auto-

create Extn Enable

 are both selected. 

d.  If you have made any changes, upload the new configuration to the 

Control Unit. 

e.  Within Manager, select 

File | Preferences

 and ensure that the 

address is 255.255.255.255, otherwise TFTP will not work. 

3. 

IP Phone Software

  

Ensure that the correct software files are present in the Manager 
directory. The files required are: 

• 

46xxxupgrade.scr 

• 

Bbla0_11.bin 

• 

def06r01_1.bin 

• 

def24r01_1.bin 

4. 

Manager and TFTPLog

 

Leave Manager running. It is also useful to have Manager's TFTP Log 
visible (select 

View | TFTPLog

). This will display the progress of file 

requests. 

 

4600 Series IP Telephone Installation 

Page 5 

IP Office 

40DHB0002UKCJ - Issue 5 (08/03/2002) 

Summary of Contents for IP Office 4600 Series









Reviews: