Avaya G700, Installing And Upgrading, Page: 558 / 808

Manual upgrade of an S8300A and G700 to R4.0
558 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
Perform the following procedures if you are upgrading an S8300 that is configured as a primary
controller:
●
To display IA770 alarms, if IA770 is enabled
●
To clear alarms
●
To check link status
●
To record all busyouts
●
To disable scheduled maintenance
●
To check for translation corruption
●
To save translations
●
To stop Communication Manager on an LSP
●
To disable alarm origination
Note:
Note:
It is no longer necessary to disable Terminal Translation Initialization (TTI) before
an upgrade or to enable it after an upgrade.
To display IA770 alarms, if IA770 is enabled
1. On the Maintenance Web Interface, click Messaging Administration .
2. On the Messaging Administration menu, under Logs, click Alarm .
3. On the Alarm Log screen, type today’s date. Leave the defaults in all other fields.
4. Click Display.
5. Resolve any alarms that are listed.
To clear alarms
1. On the Maintenance Web Interface under Alarms, click Current Alarms .
2. If no alarms are listed, skip the next two steps.
3. If alarms are listed, click Clear All .
4. Resolve any remaining major alarms through the Communication Manager SAT.
To check link status
1. Open a SAT session.
2. Enter
display communication-interface links
.
Note all administered links.
3. Enter
status link number
for each administered link.