Avaya G450 Manager, Cli Reference Manual

Page: 971 / 1334

SLS survivability
Issue 1 January 2008 971
set interface-companding
Use the
set interface-companding
command to set the interface to agree with the
companding method used by the far-end of the DS1 circuit for SLS mode.
Syntax
set interface-companding type
Parameters
User Level
read-write
Context
sls > ds1
sls > bri
Example
To set the interface to agree with A-law companding for DS1:
G450-001 (sls-ds1-<port address>)# set interface-companding alaw
to set the interface to agree with A-law companding for BRI:
G450-001 (sls-bri-<port address>)# set interface-companding alaw
Related DS1 commands
clear ds1 , set bearer-capability , set bit-rate , set channel-numbering , set connect , set
country-protocol , set interface , set long-timer , set name , set protocol-version , set side , set
signaling-mode , set sls , show (ds1) , show ds1 , show sls , sls
Related BRI commands
bri , clear bri , set bearer-capability , set country-protocol , set directory-number-a , set
directory-number-b , set endpoint-init , set interface , set layer1-stable , set name , set side , set
spid-a , set spid-b , set sls , set tei-assignment , show bri , show (bri) , show sls , sls
Parameter Description Possible
Values Default
Value
type
The interface to agree with the companding
method used by the far-end of the DS1 circuit:
●
alaw – A-law companding
●
ulaw – U-law companding
alaw
ulaw ulaw