Avaya G450 Manager, Cli Reference Manual, Page: 977 / 1334

SLS survivability
Issue 1 January 2008 977
Related DS1 commands
clear ds1 , set bearer-capability , set bit-rate , set channel-numbering , set connect , set
country-protocol , set interface , set interface-companding , set long-timer , set name , set
protocol-version , set signaling-mode , set sls , show (ds1) , show ds1 , show sls , sls
Related BRI commands
bri , clear bri , set bearer-capability , set country-protocol , set directory-number-a , set
directory-number-b , set endpoint-init , set interface , set interface-companding , set layer1-stable ,
set name , set spid-a , set spid-b , set sls , set tei-assignment , show (bri) , show bri , show sls , sls
set signaling-mode
Use the
set signaling-mode
command to set the signaling mode for the DS1 facility in SLS.
Note:
Note:
This command is only valid for DS1.
If this command is invoked to change the transmission rate and the DS1 facility
and associated signaling group have already been provisioned, the command is
blocked and a warning message, "Administrative change is in violation with
existing trunk member provisioning", is displayed.
Syntax
set signaling-mode mode-type