Avaya G450 Manager Cli Reference Manual Download Page 444

Page: 444 / 1334

CLI Commands

GRE tunneling

444 Avaya G450 CLI Reference

Related Commands

tunnel checksum

tunnel destination

tunnel key

tunnel path-mtu-discovery

tunnel source

tunnel ttl

tunnel checksum

Use the

tunnel checksum

command to specify that the router adds a checksum bit to the

outgoing GRE packet, for data verification. Use the

form of the command to specify that no

checksum bit should be added.

Syntax

[no] tunnel checksum

User Level

read-write

Context

Interface: Tunnel (L2, L2-L3)

Example

To specify that the router adds a checksum bit to the outgoing GRE packet:

G450-001(super)# tunnel checksum

Related Commands

keepalive (GRE tunnel)

tunnel destination

tunnel key

tunnel path-mtu-discovery

tunnel

source

tunnel ttl

tunnel destination

Use the

tunnel destination

command to specify the destination IP address for the GRE

tunnel. The destination is the IP address of the tunnel’s endpoint.

Note:

Note:

The CLI does not verify that the specified IP address actually exists.

Syntax

tunnel destination

ip-address

Summary of Contents for G450 Manager























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for G450 Manager

Reviews:

Related manuals for G450 Manager

Brands by name

Popular brands

Avaya G450 Manager, Cli Reference Manual

Search results

Summary of Contents for G450 Manager

Reviews:

Related manuals for G450 Manager

Brands by name

Popular brands