GRE tunneling
Issue 1 January 2008
443
keepalive (GRE tunnel)
Use the
keepalive
command in the context of a GRE tunnel to specify that the tunnel sends
keepalive packets to determine if the tunnel endpoint is up. Packets are sent according to the
interval specified in the seconds parameters, and resent according to the number of the retries
parameter.
Use the
no
form of the command to disable keepalive packets.
If the tunnel’s destination interface fails to respond to a consecutive number of keepalive
packets equal to the
<retries>
parameter, the tunnel informs the hosts, which send packets
to the tunnel that the tunnel is down. It does so, even though the source interface continues to
send keepalive packets.
Syntax
keepalive [
seconds
[
retries
]]
no keepalive
Parameters
User Level
read-write
Context
Interface: Tunnel (L2, L2-L3)
Example
To enable GRE tunnel keepalives, setting the rate to 10 seconds and retries to 3:
G450-001(super if:Tunnel 1)# keepalive 10 3
Parameter
Description
Possible
Values
Default
Value
seconds
The rate at which keepalive packets
are sent
0-32767
10
retries
The number of times that a device
continues to send keepalive packets
without a response before the
interface becomes inactive
0-255
3
Summary of Contents for G450 Manager
