DNS resolver
Issue 1 January 2008
347
Related Commands
,
,
ppp ipcp dns request
Use the
ppp ipcp dns request
command to enable requesting DNS information from the
remote peer during the PPP/IPCP session. Use the
no
form of this command to restore the
default value, which is not to request DNS information during the PPP/IPCP session.
Note:
Note:
The DNS Resolver uses the DNS servers discovered using this command.
Syntax
ppp ipcp dns request
no ppp ipcp dns
User Level
read-write
Context
Interface: Console, FastEthernet (PPP L2, PPP L2-L3), Serial (DS1 PPP L2, DS1 PPP L2-L3,
USP PPP L2, USP PPP L2-L3) Dialer (L2, L2-L3), USB-modem
Example
To enable DNS information requests from the remote peer during the PPP/IPCP session:
G450-001(config-if:FastEthernet 10/2)# ppp ipcp dns request
Related Commands
show ip domain
Use the
show ip domain
command to display the DNS Resolver’s configuration. The output
shows the DNS servers that were statically configured and those which were gathered using
DHCP or PPP protocols, as well as the list of domain suffixes.
Syntax
show ip domain
Summary of Contents for G450 Manager
