CLI Commands
WFVQ (Weighted Fair VoIP Queueing)
1298 Avaya G450 CLI Reference
Syntax
fair-voip-queue
User Level
admin
Context
interface:Dialer (L2, L2-L3), Serial (DS1 PPP L2, DS1 PPP L2-L3, USP PPP L2,
USP PPP L2-L3), FastEthernet (L2, L2-L3, PPP L2, PPP L2-L3) - when traffic shaping is
configured, Serial (DS1 FR L2, USP FR L2) - when Frame Relay Traffic Shaping is not
configured
Example
To enable Weighted Fair VoIP Queueing:
G450-001(super-if:FastEthernet 10/2)# fair-voip-queue
Related Commands - WFVQ
priority-queue
Use the
priority-queue
command to enable priority queueing mode in a serial or
FastEthernet interface. By default, priority queueing is off, and WFVQ is enabled on all Serial
interfaces and all FastEthernet interfaces for which traffic-shaping is enabled. If you disable
priority queueing by using the
no
form of the
priority-queue
command, WFVQ is
re-enabled.
Syntax
[no] priority-queue
User Level
read-write
Context
interface:Serial (DS1 PPP L2-L3, DS1 PPP L2, USP PPP L2, USP PPP L2-L3), FastEthernet
(L2, L2-L3) - when Frame Relay Traffic Shaping is configured, Serial (DS1 FR L2, USP FR L2) -
when Frame Relay Traffic Shaping is not configured, Dialer (L2, L2-L3)
Summary of Contents for G450 Manager
