Avaya G450 Manager, Cli Reference Manual

Page: 1055 / 1334

SLS survivability
Issue 1 January 2008 1055
Related Commands - Trunk-group commands
add port , clear tac , clear trunk-group , remove port , set channel-preference , set codeset-display ,
set codeset-national , set dial , set digits , set digit-handling , set digit-treatment , set
incoming-destination , set incoming-dialtone , set japan-disconnect , set numbering-format , set
send-name , set send-number , set supervision , set tac , set trunk-hunt , show trunk-group , show
(trunk-group) , trunk-group
Related Commands - DS1 commands
clear ds1 , set bearer-capability , set bit-rate , set channel-numbering , set connect , set
country-protocol , set interface , set interface-companding , set long-timer , set protocol-version ,
set side , set signaling-mode , show (ds1) , show ds1
Related Commands - BRI commands
bri , clear bri , set bearer-capability , set country-protocol , set directory-number-a , set
directory-number-b , set endpoint-init , set interface , set interface-companding , set layer1-stable ,
set side , set spid-a , set spid-b , set tei-assignment , show bri , show (bri)
Related Commands - SLS commands
set sls , show sls , sls
set numbering-format
Use the
set numbering-format
command to specify the numbering plan for the current
trunk in SLS. The numbering plan encodes the Numbering Plan Indicator and Type of
Number fields in the Calling/Connected Party Number IE in the ISDN protocol.
Note:
Note:
Leave the setting of
type
to be unknown since SLS does not currently support
an administrative table to calculate the Calling Party Number that is consistent
with the numbering plan of the PSTN service provider.
Note:
Note:
This command only applies to ISDN trunks.
Syntax
set numbering-format type