Avaya G450 Manager, Cli Reference Manual

Page: 1015 / 1334

SLS survivability
Issue 1 January 2008 1015
Context
sls > sig-group
Example
To remove gateway 3 with module v5 from the NFAS-managed DS1 group:
G450-001(sls-sig-group 100)# remove nfas-interface 005v5
Related Commands
add nfas-interface , clear sig-group , set associated-signaling , set primary-dchannel , set sls , set
trunk-group-chan-select , show (sig-group) , show sig-group , show sls , sig-group , sls
set associated-signaling
Use the
set associated-signaling
command to specify whether the D-channel is
physically present in the DS1 interface in SLS.
Note:
Note:
If this command is invoked to change the transmission rate and the DS1 facility
and associated signaling group have already been provisioned, the command is
blocked and a warning message, "Administrative change is in violation with
existing trunk member provisioning", is displayed.
Syntax
set associated-signaling {yes | no}
Parameters
User Level
read-write
Context
sls > sig-group
Parameter Description Default Value
yes
Keyword specifying the D-channel is present in the
same DS1 interface. This is the default.
no
Keyword specifying to use Non-Facility Associated
Signaling (NFAS)