manualshive.com logo in svg

Avaya G250 Series, Quick Start For Hardware Installation, Page: 4 / 36

Share
Download
Avaya G250 Series Quick Start For Hardware Installation Download Page 4

Contents

4 Quick Start for Hardware Installation Avaya G250 Media Gateway

 

Chapter 5: Power Up   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

23

Grounding Requirements .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

23

Connecting Ground Conductors  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

24

Using a Ground Block .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

24

Connecting Power .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

25

LED Sequence  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

25

Chapter 6: Prepare for Configuration   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 

27

Preparing a G250 with an S8300B Media Server.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

27

Preparing the G250 with an S8300B for a remote configuration  .  .  .  .  .  .  .  .  

32

Configuring a G250 without an S8300B Media Server   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

33

Preparing for a remote configuration of the G250 .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

34

Next Steps  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  35

Using AIW and GIW  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

35

Using the Command Line Interface.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  

35

Summary of Contents for G250 Series





































Reviews:

No comments