Avaya ERS 8600 series, Configuration Manual

Page: 392 / 420

OSPF link-state database table
Use the
show ipv6 ospf lsdb
command to display the OSPF link-state database (LSDB)
table. The syntax for this command is as follows.
show ipv6 ospf lsdb [scope
<value>
] [port
<value>
] [vlan
<value>
] [tunnel
<value>
] [area
<value>
] [lsatype
<value>
] [lsid
<value>
] [adv_rtr
<value>
]
[detail]
You can specify a scope, VLAN, tunnel, area string, link-state advertisement type (0 to 5), link
state ID, or advertising router. If you add the
detail
option to the command, the output
contains more information.
Figure 41: show ipv6 ospf lsdb command output on page 392 shows sample output with no
variables for this command.
Figure 41: show ipv6 ospf lsdb command output
Figure 42: show ipv6 ospf lsdb detail command output on page 393 shows partial output of
this command with the
detail
option.
CLI show commands
392 Configuration — IPv6 Routing November 2010