Avaya ERS 8600 series, Configuration Manual

Page: 389 / 420

OSPF configuration settings for a port
Use the
show ports info ospf
command to display information about the OSPF
parameters of the specified port or all ports. The syntax for this command is as follows.
show ports info ospf [
<ports>
]
The following table explains the parameters for this command.
Table 38: Command parameters
Parameter Description
ports Specifies the port or range of ports to
configure in the format slot/port.
Figure 37: show ports info ospf command (partial output) on page 389 shows sample output
for this command.
Figure 37: show ports info ospf command (partial output)
OSPF information
Use the
show ipv6 ospf info
command to display the current OSPF settings for the
switch. The syntax for this command is as follows.
show ipv6 ospf info
OSPF configuration settings for a port
Configuration — IPv6 Routing November 2010 389