Note:
If none of the USB cables provided with the media station fit your smartphone, you must use the
USB cable that came with your smartphone. You might not be able to use the cable sleeve or
the docking cradle when you use another USB cable.
Procedure
1. If using a smartphone that you plan to dock on the media station, assemble the cable that
your device uses to the required cable sleeve.
• For devices that use an Apple Lightning cable, insert the cable as shown in the figure with
the side that has the raised key on the connector facing up. Slide the connector into the
sleeve. The connector will not slide into the sleeve if you have the raised key facing down.
• For devices that use an Apple 30-pin cable, insert the cable as shown in the figure with
the side that has the raised key on the connector facing up. Slide the connector into the
sleeve. The connector will not slide into the sleeve if you have the raised key facing down.
• For devices that use a micro USB cable, insert the cable as shown in the figure with the
shorter-width side of the connector facing up. Slide the cable into the sleeve.
Initial setup and connectivity
46
Installing and Maintaining the Avaya E159 and E169 IP Media Stations
February 2015
Comments? [email protected]
