High Reliability
Issue 7 November 2003
5-39
555-233-115
High Reliability
Required Hardware
The equipment in
must be on-site before the upgrade begins. To place
a claim for missing equipment, as part of the Streamlined Implementation
process, call 1-800-772-5409, or the number provided by your Avaya
representative.
Required Tools
The following tools and items may be required during the upgrade:
■
High-intensity flashlight or AC drop light
■
3/8-inch flat-blade screwdriver with a 10-inch shank (minimum)
■
5/16-inch and 1/4-inch sockets with a ratchet and 10-inch extension
■
Long-nose pliers to disconnect ground straps and straighten backplane
pins
Table 5-10.
Required Hardware
Equipment
Description
Quantity
J58890A
(PEC 6300-05X)
Processor Port Network
1
J58890AF
Expansion Control Carrier
1
106647985
TN775B Maintenance
1
103557294
or
103281788
TN776 Expansion Interface
TN570 Expansion Interface
2 or 6
1
2 or 6
1,2
1.
Use 2 for a high reliability system with 2 port networks; 6 with 3 port networks. Either 1
or 4 Expansion Interfaces (EIs) ship loose with the EPN equipment. The factory has
installed either 1 or 2 EIs in the new PPN.
2.
Required port network interfaces with the optional packet bus.
J58890TO-1 L1
Removable Media
4
407439975
20-Foot Multi-mode Fiber Optic Cable
1 or 3
3
3.
Use 2 or 6 if the PPN and EPN(s) are remotely located. The fiber that previously
connected an upgraded G2 universal module (not a traditional module) to the G2 TMS
has the correct transceiver connectors and, therefore, can be reused.
106455348
or
106455363
9823-A Lightwave Transceiver
9823-B Lightwave Transceiver
2 or 6
4
2 or 6
5
4.
One pair for each fiber connection. For each connection, install one 9823-type lightwave
transceiver in an EPN and 1 in the PPN. A 9823-type transceiver can be reused from
each upgraded G2 universal module. Additional transceivers also ship loose with the
EPN equipment.
