Avaya CS 1000, Fundamentals

Page: 64 / 270

Mark the cell areas on the floor plan, one area for each cell, and split cell overlap
areas in half, as shown in
Figure 33: Example of dividing the coverage area and
recording offices on page 63 as heavy dotted lines.
2. Count the number of user offices in each cell area.
3. Record the number of user offices on the floor plan in each cell area.
Creating an estimate table
Use the following table to estimate the number of handset users for each cell.
Table 5: Estimate users in a cell
Estimate for: 1C1 1C2 1C3 1Cn
Users inside the cell with
an office
Users with an office
outside of a cell who walk
into the cell
Users without an office
Users in a cell
Creating an estimate table
1. Make an estimate table.
Include a column for each cell center.
2. Label the rows as shown in Table 5: Estimate users in a cell on page 64.
3. Label each column heading with the cell center indicator.
Use this table to determine how many times to subdivide each cell to carry the
handset telephone traffic.
Calculating the number of users inside the cell with an office
Table 6: Example of the table first row calculation
Estimate for: 1C1 1C2 1C3 1C4 1C5 1C6 1C7
Users inside the cell with
an office 8.4
Users with an office
outside of a cell who walk
into the cell
Users without an office
Users in a cell
Site planning and hardware deployment
64 SIP DECT Fundamentals October 2012
Comments? infodev@avaya.com