manualshive.com logo in svg

Avaya CS 1000, Fundamentals

The Avaya CS 1000 user manual provides comprehensive insights into the fundamental features and functionalities of this exceptional product. Download the free manual from our website and unlock a wealth of knowledge to maximize your Avaya CS 1000 experience.

Share
Download
background image

TLS

For TLS the OpenSSL library version OpenSSL 0.9.8e is applied. The following license text is
applicable to the OpenSSL Library:

OpenSSL License:

Copyright (c) 1998-2007 The OpenSSL Project. All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted
provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of

conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list

of conditions and the following disclaimer in the documentation and/or other
materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display

the following acknowledgment: "This product includes software developed by the
OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)"

4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to endorse

or promote products derived from this software without prior written permission. For
written permission, please contact [email protected].

5. Products derived from this software may not be called "OpenSSL" nor may

"OpenSSL" appear in their names without prior written permission of the OpenSSL
Project.

6. Redistributions of any form whatsoever must retain the following acknowledgment:

"This product includes software developed by the OpenSSL Project for use in the
OpenSSL Toolkit (http://www.openssl.org/)"

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY
EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This product includes cryptographic software written by Eric Young ([email protected]).

Third Party Software

240     SIP DECT Fundamentals

October 2012

Comments? [email protected]

Summary of Contents for CS 1000















































































































































































































































































Reviews:

No comments

Related manuals for CS 1000

Gateway 7250R Rack Mounting Instructions preview
7250R
Brand: Gateway Pages: 26
Supero SuperServer 5013C-MT User Manual preview
SuperServer 5013C-MT
Brand: Supero Pages: 98
H3C UniServer R4900 G5 Operating System Installation Manual preview
UniServer R4900 G5
Brand: H3C Pages: 141
B&B Electronics Vlinx Serial Servers ESP901E Manual preview
Vlinx Serial Servers ESP901E
Brand: B&B Electronics Pages: 92
SystemBase Portbase PB-3010 User Manual preview
Portbase PB-3010
Brand: SystemBase Pages: 45
Moxa Technologies NPort IA5250I/5250I-T Series Quick Installation Manual preview
NPort IA5250I/5250I-T Series
Brand: Moxa Technologies Pages: 2
Axis 27978R1 User Manual preview
27978R1
Brand: Axis Pages: 66
Blackberry ENTERPRISE SERVER FOR NOVELL GROUPWISE Installation And Configuration Manual preview
ENTERPRISE SERVER FOR NOVELL GROUPWISE
Brand: Blackberry Pages: 73
Sun Microsystems Ultra Enterprise 3000 Installation Manual preview
Ultra Enterprise 3000
Brand: Sun Microsystems Pages: 48
StarTech.com RK1536BKF User Manual preview
RK1536BKF
Brand: StarTech.com Pages: 24
Xblue Networks X16plus Quick Start Manual preview
X16plus
Brand: Xblue Networks Pages: 2
EXAGATE SYSGuard 3001 Quick Installation Manual preview
SYSGuard 3001
Brand: EXAGATE Pages: 8
National Instruments ENET-Serial Getting Started preview
ENET-Serial
Brand: National Instruments Pages: 4
McIntosh MS750 Service Manual preview
MS750
Brand: McIntosh Pages: 12
McIntosh MS750 Owner'S Manual preview
MS750
Brand: McIntosh Pages: 52
ClearCube I8020 Quick Start Manual preview
I8020
Brand: ClearCube Pages: 2
RoviSys OPC90 User Manual preview
OPC90
Brand: RoviSys Pages: 146
Gigafast EE171-PR User Manual preview
EE171-PR
Brand: Gigafast Pages: 74

Brands by name

Popular brands

Load more brands