Avaya Cajun P580, User Manual, Page: 573 / 770

Document No. 650-100-700, Issue 1 20-9
Managing Intelligent Multicasting
3. See Table 20-2 for an explanation of the Router Port Display/
Configuration Dialog Box parameters.
4. Select a router port from the Port column and click DELETE to delete
the port, or CANCEL to restore previous settings.
CLI Command
To display router ports using the CLI, enter the following command from
User mode:
# show intelligent-multicast router-port
Configuring Static Router Ports
You can configure Static Router ports using either the Web Agent or the
CLI.
Web Agent
Procedure
To configure a static router port using the Web Agent:
1. Select Global Configuration from the L2 Switching > Intelligent
Multicast group on the Web Agent window. The Intelligent Multicast
Global Configuration dialog box opens (
Figure 20-2 ).
* Note: You must enable intelligent multicasting on a global
basis to make your static router port configuration
active. See “
Configuring Global Intelligent
Multicasting ” earlier in this chapter.
2. Select Display/Configure Router Ports. The Router Port Display/
Configuration dialog box opens ( Figure 20-3 ).
3. Enter a port number in the Port field.
Table 20-2. Router Port Display/Configuration Dialog Box
Parameters
Parameter Definition
Port Displays the switch port configured as a router port.
VLAN Displays which VLAN the router port is bound to.
Application Displays the active applications of the router port. The
applications include:
• Mgmt (Static)
• IGMP
• LGMP
• CGMP