Avaya Cajun P580, User Manual, Page: 572 / 770

20-8 User Guide for the Avaya P580 and P882 Multiservice Switches, v6.0
Chapter 20
—
Delete All Learned Client Ports to remove all learned client
ports from all multicast sessions.
—
Display/Configure Router Ports to display the router ports and
configure your static router ports.
CLI Command
To configure intelligent multicasting globally using the CLI, enter the
following command from Configure mode:
(configure)# set intelligent-multicast {enable}
Displaying Router Ports
You can display router ports using either the Web Agent or the CLI.
Web Agent
Procedure
To display router ports using the Web Agent:
1. Select Global Configuration from the L2 Switching > Intelligent
Multicast group on the Web Agent window. The Intelligent Multicast
Global Configuration dialog box opens (
Figure 20-2 ).
* Note: You must enable intelligent multicasting on a global
basis to make your router ports active. See
“
Configuring Global Intelligent Multicasting ” earlier
in this chapter.
2. Select Display/Configure Router Ports. The Router Port Display/
Configuration dialog box opens ( Figure 20-3 ).
Figure 20-3. Router Port Display/Configuration Dialog Box