Avaya Cajun P550 Manager 5.1 User Manual Download Page 28

Page: 28 / 132

2-6

Chapter 2

Cajun P550/P880 ATM Uplink User Guide, Version 1.1

Figure 2-4. ATM Module Information Dialog Box

Table 2-2. ATM Module Information Parameter

Parameter

Definition

Module Status

Displays the ATM Uplink module status. Options
include:

• Waiting Init - Module is in set up mode.

• Initializing - Module is sending packets to

connected devices

• Running Diagnostics - Module is

running internal diagnostics.

• No Valid Image - Image may be

corrupted. Download a new image.

• Booting Image - The module is booting

up.

• Active - The module is ready.

Boot Version

Displays the version of the boot image software.

APP1

Displays the image version on APP1.

Summary of Contents for Cajun P550 Manager 5.1





































































































































Search results

Summary of Contents for Cajun P550 Manager 5.1

Reviews:

Related manuals for Cajun P550 Manager 5.1

Brands by name

Popular brands

Avaya Cajun P550 Manager 5.1, User Manual

Search results

Summary of Contents for Cajun P550 Manager 5.1

Reviews:

Related manuals for Cajun P550 Manager 5.1

Brands by name

Popular brands