Avaya BCM 450 Configuration Manual Download Page 11

NC; Reviewed: 
10/01/2010 

Avaya BCM Solutions Test Lab 

Application Notes 

©2010 Avaya Inc. All Rights 

Reserved. 

11 of 14 

ConfiguringSIPTrunkingSkype-BCM6 

 

 

Page 11 of 14 

15. Configure a destination code to route dialed digits by clicking on the 

Add

 button. Digits that 

begin with this destination code will be presented to the SIP trunking component on the BCM for 
routing towards the Service Provider.  

16. In the 

Add Destination Code

 dialog box, enter a numeric number for the destination code and 

click on the 

OK

 button. 

17. Select the row representing the Destination Code entered in the previous step 

18. Under 

Normal Route

 column, double click and enter the route entered in Step 7. 

19. 

Under the 

Absorbed Length

 column, specify the number of digits that will be absorbed before 

pre-pending the configured External number configured in Step 10 and sending the rest of the 
digits to the SIP trunking component.

 

20. While the row representing the Destination Code enter in Step 16 is selected, in the 

Alternate 

Routes

 table that shows up below, click on an unused schedule 

21. In the 

Second Route

 column of the selected row above, provide the route configure in Step 13.  

22. Navigate to 

Configuration

 Telephony

Scheduled Services

 

23. Click on the schedule used in Step 20 above. 

24. Define the times when this schedule will be active by providing the start and stop times for each 

day of the week. 

25. In the 

Services

 section that appears below, select the schedule used in previous steps and do 

the following: 

  Double click the 

Routing Svc

 column and select 

Auto

 to active the schedule. 

  Enable overflow by putting a check in the 

Overflow

 checkbox 

 

5.2.3 SIP Trunk Routing table Configuration 

1.  Navigate to 

Configuration 

 Resources 

 IP Trunks

 SIP Trunking

 

2.  Select the 

Public

 tab 

3.  Click on the 

Accounts

 tab 

4.  Select the first Skype account 

5.  In the Details for Accounts table below, in the drop down list next to Called Number Characters 

to absorb select the number of digits that will be absorbed by the SIP trunking component 
before sending the dialed digits to Skype. The number selected here should be the number 
digits in the External Number configured in Step 10 

6.  Click on the 

Routing Table

 tab 

7.  Click on the 

Add

 button 

8.  In the 

Add Route

 dialog box; 

  Provide a descriptive name for the new route in the 

Name

Summary of Contents for BCM 450















Reviews: