22
Avaya B169 Conference Phone
User Guide
CONFERENCE GUIDE SETTINGS
When a multi-party call is going to be connected, a special signal (called flash or
R-pulse) is produced which transmits the command (enquiry, conference and return) to
the PBX. It may be necessary to change the type of signal if calls are connected via a
PBX. Different PBXs may require different signals. These requirements should be speci-
fied in the technical data for the PBX. Settings for the most common PBXs are listed on
Avaya’s website.
Select >
CONF GUIDE > SETTINGS.
Enter the command for a enquiry for a new dialling tone and press
OK to confirm.
(“F” is the default setting.)
Enter the command to connect everyone to a multi-party call and press
OK to
confirm. (“F3” is the default setting.)
Enter the command to return to your original call and press
OK to confirm. (“F1” is
the default setting.)
If you experience problems making multi-party calls
Your PBX may not be programmed to admit multi-party calls or the procedure may be
different. Please contact your telephone administrator or service provider.
DISPLAYING CONFERENCE GUIDE STATUS
Select >
CONF GUIDE > STATUS.
The display screen indicates the number of conference groups already stored plus how many
more groups can be added.
CONFERENCE GUIDE
