CTM; Reviewed:
SPOC 11/29/2007
Solution & Interoperability Test Lab Application Notes
©2006 Avaya Inc. All Rights Reserved.
11 of 51
AudioCodesMP118.doc
Step
Description
11.
Use
the
change locations
command to assign the default SIP route pattern to the
location. In the compliance test, all SIP endpoints whether at the main or branch site
are part of a single location defined in Avaya Communication Manager. This location
uses the default name of
Main
and is shown in the example below. Enter the route
pattern number from the previous step in the
Proxy Sel. Rte. Pat.
field. The default
values may be retained for all other fields.
12.
All SIP stations are configured as OPS stations on Avaya Communication Manager.
This includes the analog telephones, and fax machine connected to the MP-118, which
appear as SIP stations to Avaya Communication Manager.
Use the
display system-parameters customer-options
command to verify Avaya
Communication Manager has sufficient OPS capacity available to add the OPS stations
needed for the SIP and analog endpoints at the branch office in
Figure 1
. If there is
insufficient capacity, contact an authorized Avaya sales representative or business
partner to make the appropriate changes.
display system-parameters customer-options Page 1 of 10
OPTIONAL FEATURES
G3 Version: V13
Location: 1 RFA System ID (SID): 1
Platform: 13 RFA Module ID (MID): 1
USED
Platform Maximum Ports: 900 121
Maximum Stations: 450 41
Maximum XMOBILE Stations: 0 0
Maximum Off-PBX Telephones - EC500: 50 0
Maximum Off-PBX Telephones - OPS: 50 23
Maximum Off-PBX Telephones - SCCAN: 0 0
change locations Page 1 of 4
LOCATIONS
ARS Prefix 1 Required For 10-Digit NANP Calls? y
Loc. Name Timezone Rule NPA ARS Attd Pre-
Proxy Sel.
No. Offset FAC FAC fix
Rte. Pat.
1: Main + 00:00 0
1
2:
3:
