Resetting and Power Cycling the IP Telephone
Telephone Management and Troubleshooting
8-10
Issue 2.0 December 2003
Power Cycling the Phone
Use the power cycle with your System Administrator’s approval. Use power
cycling only if the basic or programmed reset procedure cannot be performed or
does not correct the problem:
1. Unplug the phone and plug it back in.
The phone connection is re-established.
2. If power-cycling does not correct the problem, your System Administrator
can perform a more severe power cycle routine by unplugging both the
phone and the Ethernet cables.
!
WARNING:
Because the type of power cycle mentioned in Step 2 involves
reprogramming certain values, Step 2 should only be performed by
your System Administrator.
Summary of Contents for 555-233-784
