![Avaya 4524GT Configuration Manual Download Page 130](http://html1.mh-extra.com/html/avaya/4524gt/4524gt_configuration-manual_3027909130.webp)
•
on page 159
•
Domain Name Server (DNS) Configuration
on page 160
•
Multiple switch configurations
The Avaya Ethernet Routing Switch 4500 Series supports the storage of two switch
configurations in flash memory. The switch can use either configuration and must be reset for
the configuration change to take effect.
A regular reset of the switch synchronizes configuration changes to the active configuration,
whereas a reset to defaults sets configuration to factory defaults. The inactive block is not
affected.
In stack configurations, all units in the stack must use the same active configuration. If a unit
joins a stack, a check is performed between the unit active configuration and the stack active
configuration. If the two differ, the new stack unit resets and loads the stack active
configuration.
The following considerations apply to NVRAM commands:
• The Nvram block that is not active is not reset to default after downgrade.
• You can save the switch binary configuration to the non-default NVRAM block.
• When you perform an agent code downgrade on the switch, only the configuration from
the default block resets to default.
Use the following ACLI commands to configure and use multiple switch configuration:
•
on page 130
•
copy config nvram block command
on page 131
•
copy nvram config block command
on page 131
show nvram block command
This command shows the configurations currently stored on the switch. The syntax for this
command is
show nvram block
Example
show nvram block
Block Active Name Last Saved
-------------------------------------------------
1 True Configuration_Block_1
2 False α
System configuration using ACLI
130 Configuration — System
April 2011
Summary of Contents for 4524GT
