
3. If PoE power is unavailable, connect the wall unit power adapter into the DC socket to
provide direct power.
The 10W 100–240 AC power adapter is sold separately and comes with four snap-in plug
adapters: Type A (U.S. and Japan), Type B (EU), Type G (UK), and Type I (AUS and China).
The part number is EC1105E11-E6.
4. (Optional) The ONA comes with zip ties that you can use to mount the ONA near the wall
unit power adapter, the device connected to the ONA, or any location you desire. There are
four slots on the top of the ONA and four slots on the bottom to give you multiple options for
securing the ONA.
Connecting your device to the ONA
Use the following figure and steps to connect your device to the ONA.
Procedure
1. Connect your device to the ONA using the 10/100/1000 BASE-T RJ-45 DEVICE port.
2. (Optional) Secure your ONA by attaching a Kensington lock to the slot above the lock icon.
3. If necessary, you can reset your ONA by inserting a paper clip into the reset switch pin hole
and pressing the switch for more than 1 second but less than 5 seconds.
Setting the ONA to factory defaults
The following parameters are the ONA factory defaults:
• Management IP Address :
May 2016
Avaya Open Networking Adapter 1101GT Installation Job Aid
6