Avatar Controls Wi-Fi Smart Bulb, User Manual

Page: 5 / 17

5
•
After entering the “Add Device” page , confirm
whether the Smart Bulb is EZ mode. if not, can
switch to EZ mode by a continuous operation of
"on-off-on-off-on" . Then click on "indicator light is
flashing fast" to start adding Smart Bulb.
•
Select the Device Work Wi-Fi and enter the
password, then start the configuration of the
device. “Device added Successfully” will be
2 seconds)
If the bulb can not be paired in EZ mode(rapid
blink), please switch to AP mode(blink slowly)