
ASSEMBLY INSTRUCTIONS
7
Wire Ring
2.
1.
STEP 1
Lay the trampoline on the floor. The trampoline will appear as shown in illustration 1.
To unfold the
AVARI® Oval Jogger
to the flat position, hold the
SEMICIRCLE RAILS(2)
and push the rails
down at the same time. The
SEMICIRCLE RAILS(2)
and
RAILS(1)
should snap together and be locked
by the
SECURE PINS(9)
when you reach the flat position. Refer to illustration 2.
Hazard label on trampoline surface reads as follows:
!
WARNING!
PREVENT serious INJURY or DEATH.
Rails can SPRING back and STRIKE someone.
ALWAYS fold and unfold carefully with TWO or
more STRONG people.
Do NOT remove this tag.
ALWAYS USE TWO OR MORE STRONG PEOPLE TO UNFOLD OR FOLD THE AVARI®
Oval Jogger. FAILURE TO USE TWO OR MORE STRONG PEOPLE MAY ALLOW THE
RAILS TO SPRING BACK INTO THE FOLDED POSITION AND STRIKE SOMEONE
WHICH CAN CAUSE SERIOUS BODILY INJURY OR DEATH.
Keep fingers away from the ends of the rails in the hinge area when unfolding the
AVARI®
Oval Jogger.
Serious injury can occur if fingers are caught between the ends of the
RAILS
.
STOP!
STEP 2
NOTE:
Make sure the
SECURE PINS(9)
are inserted into the ends of
RAILS(1, 2)
and properly secured
by the Wire Ring. Both ends of the
SECURE PINS(9)
should have approximately 1/8 inch between
the
RAILS(1, 2)
and the Wire Ring. Refer to illustration 2.
!
WARNING
Meijer.com
Summary of Contents for Oval Jogger
Page 18: ...1 2 3 4 6 5 7 9 10 11 8 18 Meijer com...
Page 22: ...PRODUCT PARTS DRAWING 22 Meijer com...
Page 24: ...NOTES 24 Meijer com...
Page 25: ...NOTES 25 Meijer com...