ASSEMBLY INSTRUCTIONS
7
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com to the Services section and order the part needed, e-mail
us at [email protected], or call us toll free at 1-800-375-7520 (in the U.S.). Our
Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday
through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
Key Rib
STEP 1
Lay the Center Beam Assembly on the floor as shown in the illustration. Now refer to the inset drawing.
Make sure the Key Rib in the
STABILIZER CAP(12)
aligns with the slot in the
REAR SUPPORT(45),
then
press the
STABILIZER CAP(12)
onto the
REAR SUPPORT(45).
Summary of Contents for AVARI Easy Glide Rower
Page 18: ...PRODUCT PARTS DRAWING 18 FRONT BACK...
Page 21: ...NOTES 21...
