ASSEMBLY INSTRUCTIONS
STEP 4
The
BUTTON HEAD BOLTS(M8x1.25x15mm)(38)
are attached on the
LEFT
and
RIGHT UPRIGHT
(2, 3).
Refer to detail view B. Tighten the
BUTTON HEAD BOLTS(M8x1.25x15mm)(38)
to bolt the
LEFT
UPRIGHT(2),
RIGHT UPRIGHT(3)
, and
CONNECTING BAR(7)
together securely. Please verify that
the
SENSOR WIRE(28)
and
SENSOR CONNECTING WIRE(27)
have already been connected at the
factory. If it has not been pre-connected, then please p
lug the
SENSOR WIRE(28)
into the
SENSOR
CONNECTING WIRE(27)
at this time.
STEP 5
Insert the
LEFT HANDRAIL(5)
into the
RIGHT HANDRAIL(6)
and secure with the
ROUND HEAD
BOLT(M6x1x15mm)(42).
Attach the
HANDRAIL ASSEMBLY(5, 6)
to the
LEFT
and
RIGHT UPRIGHT(2,
3)
with
BUTTON HEAD BOLTS(M8x1.25x40)(37)
and
ARC WASHERS(M8)(51).
STEP 6
Plug the
SENSOR CONNECTING WIRE(27)
into the
METER CONNECTING WIRE(26).
Push the wires
back inside of the
RIGHT UPRIGHT(3).
Press the
HANDRAIL CAPS(19)
onto the
LEFT
and
RIGHT
HANDRAILS(5, 6)
to cover the top ends of the
LEFT
and
RIGHT UPRIGHT(2, 3).
8
B.
Meijer.com
Summary of Contents for A450-255
Page 16: ...PRODUCT PARTS DRAWING 16 FRONT BACK Meijer com ...
Page 20: ...NOTES 20 Meijer com ...
Page 21: ...NOTES 21 Meijer com ...
