13
Equipment Mat
(not included)
Place the
AVARI® 2000R Recumbent Bike
in the area where it will be used. It is recommended that the
AVARI® 2000R Recumbent Bike
be placed on an equipment mat. The
AVARI® 2000R Recumbent
Bike
is approximately 59.3 inches long x 24.5 inches wide x 43.2 inches tall. (These dimensions may
vary up to one inch.) An area 4 feet wide x 7.5 feet long is required for safe operation of the
AVARI®
2000R Recumbent Bike.
Make sure that adequate space is available for access to and passage around
the
AVARI® 2000R Recumbent Bike.
LEVELING:
Turn the dials in the
ADJUSTABLE ENDCAPS(76)
which are attached to the
REAR
STABILIZER(2)
to keep the bike stable, so the bike sits on the floor without rocking.
Adjust
the
STAND(87)
under the
MAIN FRAME(1)
to get more support for the base of the
AVARI®
2000R Recumbent Bike.
MOVING:
The
AVARI® 2000R Recumbent Bike
must be lifted to be moved. Two people are required
to grasp the
HANDLEBAR(10)
and the
REAR STABILIZER(2),
lift and move.
FUNCTION INSPECTION:
Visually inspect the
AVARI® 2000R Recumbent Bike
to verify that assembly is as shown in the above
illustration. Check the function of the
AVARI® 2000R Recumbent Bike
by turning the crank slowly
through one complete revolution to verify that the drive train functions properly. Adjust the
TENSION
KNOB(26)
and verify that it functions properly.
CAUTION:
Locate and read the
CAUTION LABEL(92)
on the
AVARI® 2000R Recumbent Bike.
Make
sure that all users read the
CAUTION LABEL(92)
before using the product.
SET UP INSTRUCTIONS
Dial
Dial
Loosen the
NUT(M8x1.25)(88)
until it touches
the
STAND(87).
Adjust the
STAND(87)
until it
contacts the floor. Tighten the
NUT(M8x1.25)
(88)
securely against the
MAIN FRAME(1)
to lock the
STAND(87)
in position.
Meijer.com
Summary of Contents for A150-204
Page 24: ...PRODUCT PARTS DRAWING 24 FRONT BACK Meijer com...
Page 28: ...NOTES 28 Meijer com...
Page 29: ...NOTES 29 Meijer com...
